Minth University of Science and Technology:Item 987654321/1091
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 329/330
Visitors : 2649293      Online Users : 41
RC Version 5.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Adv. Search

Please use this identifier to cite or link to this item:

Title: CNC 高速高精伺服控制之分析與研究
Authors: 劉信宏
Contributors: 機電工程系(所)
Keywords: 工具機
Machine tool
Feedforward control
Contour error
Date: 2014-07-30
Issue Date: 2014-07-30 15:07:15 (UTC+8)
Abstract: 本文主要在探討CNC工具機控制器在有前饋控制與無前饋控制情況下對系統軌跡誤差的影響。首先在測試前平台上執行循圓測試程式,並以Matlab軟體進行誤差分析,此時將以不同的切削進給率、加速度及前饋控制參數進行研究,以了解前饋參數對於軌跡誤差的影響,接著並於測試平台加工工件,以評估實際加工的軌跡誤差與表面光滑度。
This thesis mainly studies how Feedforward control affects CNC machine tool controller system’s tracks error. In the beginning, we run circular test program on the test bench and use Matlab to analyze the error under varient conditions including feed rate, acceleration and Feedforward control. Therefore, we can understand how Feedforwardcontrol affects the tracks error. In addition, we estimate the actualprocessing tracks error and surface flatness by processing workepiece on the test bench.
The results of previous studies indicate that the increase of Feedforward control parameter’s ratio will lessen the contour error. According to the actual processing, Feedforward control makes the surface of workpeice unflatness due to the entity vibration cause by Feedforward control. This entity vibration will also influence the quality of processing.
Appears in Collections:[Department of Automation Engineering] Theses or Dissertations

Files in This Item:

File Description SizeFormat
CNC高速高精伺服控制之分析與研究.pdf3002KbAdobe PDF3699View/Open

All items in MITUSTIR are protected by copyright, with all rights reserved.


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback